


Brand: MM
Material: Out Bag PP woven, Inner Bag Polymide(PA)
Structure: Out Bag(PP woven)+Inner Bag (7 layers co-extrusion PA film)+Air valve
G.W: Out Bag 70-218 g/㎡, Inner Bag 75-150 g/㎡
Thickness: Inner Bag 7.5S-15S/75μm-150μm
Compressive Strength: 20Kpa-80Kpa/5T-40T
Inner Bag Heat Seal Strength: ≥35N/15MM
Inner Bag Longitudinal Tensile Strength: ≥26Mpa
Inner Bag Lateral Tensile Force: ≥26Mpa
Outer Bag Meridional Tensile Force:≥628N/CM
Outer Bag Weft Tensile Strength:≥568N/CM
High Elasticity And Softness
High elasticity, high softness can relieve impact force
9 layers co-extruded nylon membrane with a high-strength PE film bonded to a PA (nylon film) through two adhesive layers.
Improve the air tightness of the air bag, the effect is unparalleled.


Turbo Valves
MM inflatable dunnage air bags equipped with a patented valve, which allows fast inflation, when connect with the quick inflator, the time for inflation can be reduced significantly beside ensuring consistent pressure.
More convenient to reuse
High elasticity and softness
Storm-type rotary quick inflation system
Effectively enhances inflation
Make reuse easier

How To Inflate A Bag
1.Disclose the cover of the valve
2.Align the muzzle with the valve mouth
3.Press the airgun vertically until it locked on the valve
4.Push the switch upward.
5.Hold the airgun start to inflate the bag.
6.Pull out the airgun when the air pressure in the bag is enough
demonstration
Using the right filling method can effectively improve the safety of cargo transportation, so that the goods arrived at the destination remain intact.In addition to choosing a good inflatable bag, but also need to know how to properly fill, the following we show you a few correct cases of filling, for your reference!


RECOMMENDED PRODUCTS